Using
the
Dolby®
Digital
Dynamic
Range
Control
feature
This
dynamic range control feature causes the ATSC
dynamic range to be further compressed, allowing
you to switch from ATSC to analog broadcasts at the
same
dynamic range.
To
use the Dolby Digital Dynamic Range
Control:
1
MENU
Press 0 and open the
Sound
menu.
2 Highlight
Audio
Setup
and press
@.
3
In
the
Dolby
Digital
Dynamic
Range
Control
field,
select
Compressed.
When
Standard
is
selected,
the audio
is
output with minimal compression.
4 To save the new settings, highlight
Done
and
press@.
To revert to the factory defaults, highlight
Reset
and
press@.
Note:
•
This
item will
be
grayed out for NTSC signals,
Video,
ColorStream,
and
PC
inputs.
•
The
Dolby Digital Dynamic Range Control will
function
in
relation to Optical Output Format
(PCM mode).
Using
the
Locks
menu
The
Locks menu includes the
Enable
Rating
Blocking, Edit Rating Limits, Input Lock, Front
(Control) Panel Lock, GameTimer, and New PIN
Code
features. You can use these features after
entering the correct PIN code.
Entering
the
PIN
code
1 Press
M~U
and highlight the locks menu icon.
2 Press
T,
which displays the PIN
code
entry
screen.
•
The
lock
System
screen (below) appears if a
PIN
code
has not been stored. Press the Channel
Number
buttons to
enter
a new four-digit code,
40
enter the
code
a second time to contirm, and
press@.
•
The
locks/Active screen appears if the PIN code
is
already stored. Use the
Number
buttons to
enter
your
four-digit
code
and press @.
If the wrong PIN code
is
entered, the message
"Incorrect
PIN code, please try again!" appears.
Highlight
Retry
and press
@.
Enter
the
code
again
and
press@.
When the correct PIN code is entered, the locks menu
opens.
Note:
PIN code cannot
be
set
to
"0000".
If
you
cannot
remember
your
PIN
code
While the
PIN
code entering screen
is
displayed. press
I
RECALL
Ifour times within
five
seconds. The
PIN
code
will
be
cleared and
you
can enter a
new
PIN
code.
Changing
your
PIN
code
1 Press
M~U
and highlight the locks menu icon.
2 Press T to display the PIN code entering screen.
3 Enter
your
four-digit PIN code and press @.
4 Press
....
to highlight
New
PIN
Code
and press
@.
5 Press the
Number
buttons to
enter
a new four-
digit code.
Reenter
the PIN
code
to contirm it.
6 Press @.
The
new PIN
code
is
now active.
Note:
PIN code cannot
be
set
to
"0000".
Blocking
TV
programs
and
movies
by
rating
(V-Chip)
Some
TV
programs
and
movies include signals that
classify the
content
of
the program (violence, sex,
dialog, language).
The
V-Chip feature in this
TV
detects the signals and blocks the programs according
to the ratings you select. (For rating descriptions, see
the tables on the next page.)
(continued)
To Next Page
Loading...
