Toshiba 40E200U1 - Chapter 3: Using the Remote Control; Learning About the Remote Control

Learning about the remote control
The buttons used for operating the TV only are
described here.
7 Channel Numbers (0-9, -/100) directly tune channels.
The ~ button is used to tune digital channels (1& page
33) or to edit the Favorites List (I@f page 30).
8 FAV BROWSER accesses the Favorites List in the
Channel Brower™ (I@f page 30).
9 RECALL displays TV status information (I@f page 50).
10 CH • ~ cycles through programmed channels when no
menu is on-screen (1& page 25).
11 C.CAPTION accesses the closed caption (1& page 38).
12 MUTE reduces or turns off the sound (1& page 38).
13 VOL +- adjusts the volume level.
14 INFO displays TV status information as well as program
details, when available (I@f page 50).
15 EXIT closes on-screen menus.
16 ENTER activates highlighted items in the main menu
system.
17 CH RTN returns to the last viewed channel or source
(I@f page 33).
18 Arrow buttons (. ~ .... ~) When a menu is on-screen,
these buttons select or adjust programming menus.
(Also see .... / ~ .)
19 .... / ~ While watching TV, these buttons open the
Channel Browser™ and tune to the previous/next
channel in the channel history (1& page 31).
(Also see "Arrow buttons.")
20 MENU accesses the main TV menu system
(I@f pages 22 and 23).
21 STOP Stops the tape or DVD.
22 PLAY Begins playback of a tape or DVD.
23 SKIP'" Skips forward to locate later DVD chapters.
24 FF Fast-forwards the tape or DVD.(Press during play
mode to view the picture moving rapidly forward.)
25 EJECT Eject the tape or DVD.
26 PAUSE Press during play or record mode to pause the
picture; press again to restart.
27 SKIP'" Skips back to beginning of current DVD
chapter, or locates previous chapters.
28 REW Rewinds/reverses the tpae or DVD. (Press
during play mode to view the picture moving rapidly
backward.)
--1
--2
--3
7
4
5
6
8
9
10
11
17
14
18
19
15
20
16
25 21
26
22
27
23
28
24
Note: The error message "NOT AVAILABLE"
may appear if you press a key for a function
that is not available.
1 POWER turns the TV on and off. When the TV is
on, the green LED indicator on the TV front will be
illuminated.
2 PIC SIZE cycles through the picture sizes: Natural,
TheaterWide 1/2/3, Full, 4:3 HD, Native and Dot by Dot
(I@f page 34).
3 PIC MODE selects the picture mode (I@f page 36).
4 INPUT selects the video input source (1& page 29).
5 SLEEP accesses the sleep timer (I@f page 48).
6 FREEZE freezes the picture. Press again to restore the
moving picture (1& page 36).
21