3 Press
..
or T to select
Audio,
and then press
....
or
~
to select the desired service.
4
EXIT
Press
o.
Selecting
stereo/SAP
broadcasts
The multi-channel TV sound (MTS) feature allows
you
to
output high-fidelity stereo sound. MTS
also can transmit a second audio program (SAP)
containing a second language, music, or other audio
information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the
word "STEREO" or "SAP" appears on-screen when
I
RECALL
I
is
pressed.The MTS feature is only available
for analog signals on the
ANT/CABLE
input.
To
listen to stereo sound:
1
MENU
Press 0 and open the
Sound
menu.
2 Highlight
Audio
Setup
and press
@.
3
In
the
MTS
field, select
Stereo.
4
To
save the new settings, highlight
Done
and
press@.
To
reset the settings
to
the factory defaults,
highlight
Reset
and press
@.
Note:
•
You
can typically leave the
TV
in Stereo
mode
because
it will automatically
output
the type
of
sound
being
broadcast
(stereo
or
monaural).
•
If
the stereo
sound
is noisy,
select
Mono
to
reduce the noise.
To
listen to an alternate language on an
ATSC digital station (if available):
Highlight the
Language
field in step 3 above, and
then press
....
or
~
to
select the language you prefer.
To
listen to a second audio program on an
analog station (if available):
Select
SAP
in step 3 above.
Note:
• A secondaudio program
(SAP)
can
be
heard only
on those
TV
stations that offer
it.
For example, a
station might broadcast another language as a
second audio program. Ifyou have SAP
on,
you
will see the current program on the screen
but
hear the other language instead
of
the programs
normal audio.
• Ifyou have SAP on
and
the station you are
watching
is
not broadcasting a second audio
program, the stationsnormal audio will
be
output. However, occasionally there
is
no sound
at
all
in
SAP
mode. Ifthis happens, set the MTS
feature
to
Stereo mode.
Adjusting
the
audio
quality
You
can adjust the audio quality by adjusting the
bass, treble, and balance.
To
adjust the audio quality:
1
MENU
Press 0 and open the
Sound
menu.
2 Highlight
Audio
Settings
and press
@.
3
Pr;ss
Tor
..
to highlight the item you want to
adjust
(Bass,
Treble,
or
Balance).
4 Press
....
or
~
to adjust the level.
.....
makes the bass
or
treble weaker
or
increases the balance
in
the left channel
(depending
on the item selected).
•
~
makes the bass
or
treble stronger
or
increases the balance in the right channel
(depending
on the item selected).
5
To
save the new settings, highlight
Done
and press
@.
To
reset the settings
to
the factory defaults,
highlight
Reset
and press @.
Selecting
the
optical
audio
output
format
You
can use this feature to select the optical audio
output format when you connect a Dolby Digital
decoder or other digital audio system to the
Optical
Audio
Out
terminal on the TV (see "Connecting a
digital audio system" on page 18).
To
select the optical audio output format:
1
MENU
Press 0 and open the
Sound
menu.
2 Highlight
Audio
Setup
and press @.
3
In
the
Optical
Output
Format
field, select either
Dolby
Digital
or
PCM,
depending on your device.
4
To
save the new settings, highlight
Done
and press
@.
To
revert to the factory defaults, highlight
Reset
and press
@.
(continued)
39
I
To Next Page
Loading...
