Toshiba 40E200U1 - Chapter 7: Using the TVs Advanced Features; Using the Advanced Audio Settings Features; Using the QSound Sound Feature

Using the advanced audio
settings features
~-~ ~~~ ~~.~~--~ ~ ~---~~ ~-~ ~-~~ - ~
Using the QSound@ sound feature
aSound@ is the original name for a positional three-
dimensional (3D) sound processing algorithm from
QSound Labs that creates 3D audio effects from
multiple monophonic sources and sums the outputs
to two channels for presentation over regular stereo
speakers.
To adjust the QSound@ settings:
1 Put the TV in STEREO mode (1& "Selecting
stereo/SAP broadcasts" on page 39).
2
MENU
Press 0 and open the Sound menu.
3 Highlight Advanced Audio Settings and press @.
4 Press T or ... to highlight the QSound feature,
and then press ~ or ~ to turn the QSound effect
On or Off.
5 To save the new settings, highlight Done and
press@.
To revert to the factory defaults, highlight Reset
and press@.
Note: If the broadcast is monaural, the
OSound effect will not work.
53 I