Sound
problems
• Check the antenna/cable connections (I&' Chapter
2).
•
The
station may have broadcast difficulties. Try
another channel.
•
The
sound may be muted. Press
VOLUME.
•
If
you hear no sound, try setting the
MTS
feature
to
Stereo
mode (I&' page
39).
•
If
you are not receiving a second audio program
from a known
SAP
source, make sure the
MTS
feature is set to
SAP
mode (I&' page
39).
•
If
you hear audio that
seems
"incorrect" for the
program you are watching (such as music
or
a
foreign language), the
SAP
mode may
be
on. Set
the
MTS
feature to
Stereo
mode
(1& page
39).
Remote
control
problems
• Remove all obstructions between the remote
control and the TV.
•
The
remote control batteries may be dead.
Replace the batteries (I&' page 20).
•
If
the
TV
still does not act as expected, use the
Reset Factory Defaults procedure (1& page 28).
Channel
tuning
problems
•
The
channel may have been erased from the
channel
memory
by the
Programming
channels
automatically
feature. Add the channel to the
channel
memory
(1& page 25).
•
The
channel may be blocked by the
LOCK
feature. Unblock the channel (1& page 42).
•
If
you are unable to tune digital channels, check
the antenna configuration (1& page 24).
If
you
are still unable to tune digital channels, clear all
channels from the channel list and reprogram
channels into the channel memory (1& page 25).
If
you are still unable to tune digital channels,
use the Reset Factory Defaults procedure (1&
page 28). Also see
"TV
stops responding to
controls"
and
"Other
problems"
(I&' page 54).
Closed
caption
problems
•
If
the program
or
video you selected is not
closed-captioned, no captions will display (I&'
page 37).
•
If
text is not available, a black rectangle may
appear.
If
this happens, turn
off
the closed
caption feature (I&' page 37).
• A closed-caption signal may not display
correctly
in
the following situations: a) when
a videotape has been dubbed; b) when the
signal reception is weak;
or
c) when the signal
reception is nonstandard (I&' page 37).
Rating
blocking
(V-Chip)
problems
• If you forget your
PIN
code: While the PIN
code
entering screen is displayed, press IRECALL I
four times within 5 seconds.
The
PIN
code
you
previously stored will be cleared (I&' page 40).
No
REGZA-LiNK
operation
•
The
REGZA-LINK
feature is available for
Toshiba
REGZA-LINK
compatible devices.
• Make sure the
HDMI
cables with the
HDMI
Logo
(HOmn
are used.
• When the connected
REGZA-LINK
device does
not work correctly after you have changed settings
of
the device, turn off your
TV
and unplug the
power cord, then plug and turn
on
again.
•
If
several devices are connected,
REGZA-LINK
feature may not operate properly.
• Read the instruction manual furnished with the
connected
REGZA-LINK
device.
HDMI
problems
For HOMI cables
• Make sure to use cables with the
HDMI
Logo
(HOmn
(I&'
page
13).
Media
Player
problems
• Make sure that devices are connected correctly.
• Incorrect behavior may occur with a USB HUB
connection.
• Photo files that was processed and edited by using
the PC's application software may not be able to be
viewed.
• The TV may select one format automatically and
play
it
when contents that support two
or
more
formats are played.
• Confirm contents
of
the USB storage device are
formats that correspond with this
TV
(1& page 45).
55
I
To Next Page
Loading...
