Network Setup fails (Auto)
•
The
LAN
cables
are not
connected
properly
or
at
all.
Connect
all cables.
•
"The
DHCP
service
is
not
enabled
on the router,
or
no router
is
present. Refer to
your
router's
documentation
for instructions on
enabling
DHCP.
If
you
do
not have a router, you must
manually set up the network address"
Network Setup fails (Manual)
• The TV
£P
address
is
the same as the networked PC's.
The TV
lP
address must
be
different from the PC's
[p
address.
•
"The
TV IP address
is
not on the same subnet as
the networked PC's. For example, if the PC has
IP 192.168.0.100 with netmask 255.255.255.0,
and the
TV
has IP 192.168.0.200 with netmask
255.255.255.0, then they are both on same subnet.
Conversely,
if
the PC has IP 192.168.1.100
with netmask 255.255.255.0, and the
TV
has IP
192.168.0.200 with netmask 255.255.255.0, then
they are on
DIFFERENT
sub-nets."
Unstable network connection
• Unplug the
Ethernet
cables, and then
connect
them again.
The "Server" name is not displayed
•
The
LAN
cables
are not
connected
properly
or
at
all.
Connect
all cables (1& pages 20).
•
"The
network
setup
on
the
Server
is incorrect.
Make
sure both the
Server
and
TV
are using the
same
network
type
(DHCP/manual)
and have
compatible
network settings."
•
The
networked
Server
does not have shared
folders set up correctly.
•
There
are no
master
browsers on the network. To
configure
your
networked
PC to be the
master
browser
of
its
sub
net, refer to
your
operating
system
user guide
or
consult an IT professional.
• Too many
sharing
devices are connected. Please
reduce the
amount
of
sharing device on the
network.
Media
Player
problems
•
Make
sure that devices are
connected
correctly.
• Incorrect
behavior
may
occur
with a USB
HUB
connection.
• A size
of
pictures stored
in
the
DLNA
recognition
server may be automatically changed by the
DLNA
recognition servers end and displayed.
• Photo files that
was
processed and edited by
lIsing the
PC's
application software may not be
able to be viewed.
•
The
TV
may
select
one
format automatically
and
play it when contents that
support
two
or
more
formats are played.
64
•
Copyright
protection
contents
stored in the
DLNA
recognition
server
may not be able to be
played.
•
Contents
may not be
played
with stability
by traffic (degree and congestion
of
the data
transmission) on the network etc.
•
Contents
that
PC
originally recorded may not be
able to be played correctly.
• Set the access limitation
of
the DLNA recognition
server cOITectly according
to
the manual
of
the
DLNA recognition server.
• Confirm contents
of
the
DLNA
server
and the
USB storage device are formats that
correspond
with this
TV
(It$'
page
51, 53).
•
Depending
on the
DLNA
recognition server, it
may take time to display the list.
•
Depending
on the
DLNA
recognition server. the
access
may be limited by the
MAC
address. Set
it correctly according to the
DLNA
recognition
server's
manual.
This
TV's
MAC
Address
can be
confirmed
at
MAC
address
(1&
page
56).
To Next Page
Loading...
