13
Getting started
Turning the TV on
Switching on the TV
Connect the power cord to a wall outlet, the
! power indicator lights in red (standby mode).
1 Press
on the remote control or ! on the
TV right side panel, the ! power indicator
lights in green�
Note:
If you watch black and white programmes when
the Colour System mode is set to Auto, colour
noise may appear on the screen. In this case
select the appropriate Colour System (For the
system of each country or region, refer to pages
17, 54).
Switching off the TV
1 Press
on the remote control or ! on the
TV right side panel to switch to the standby
mode�
Notes:
• When the TV will not be used for a long period
of time, such as during vacation or travel,
remove the power plug from the wall outlet.
• If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the
TV automatically when power is applied again.
If power is going to be off for a long time and
you are going to be away from your TV, unplug
the power cord to prevent the TV from turning
on in your absence.
Tuning the TV for the first time
Before switching on the TV, put your decoder and
media recorder to standby, if they are connected,
and ensure that the aerial is connected� To setup
the TV, use the buttons on the remote control as
detailed on page 11�
1 Press
� The Menu Language screen will
appear� This screen will appear the first time
that the TV is switched on�
Menu Language
English 中文 Melayu
Tiếng Việt
Русский
Français
2 Press s, r, v or w to select the Menu
Language (English, Chinese (CS), Malay,
Thai, Vietnamese, Russian, Arabic, Persian
or French)�
3 Press to display the Location menu
(- page 18)�
Press v or w to select Store or Home� For
normal home use, select Home�
Location
Home
To use the TV for displaying in a store showroom, please select
[Store]. [Home] mode is recommended for normal use.
Store mode:
• A conrmation menu will appear.
• AutoView menu is not available.
4 Press to display the TV Mounting menu,
and then press v or w to select Stand or
Wall�
TV Mounting
Stand
If you are mounting the TV on a wall please select [Wall]. [Stand] is
recommended for other uses.This setting may be modified later
under Sound Navigation in the SOUND menu.
5 Press to display the AutoView menu
(- page 20)�
Press v or w to select Yes or No�
AutoView
No
AutoView mode automatically adjusts picture settings to suit
ambient light conditions.
Do you wish to enable AutoView mode?
6 Press to display the Auto Signal Booster
menu (- pages 16, 17), and then press v or
w to select Yes or No�
Yes
Auto Signal Booster
Signal Booster boosts weak analogue broadcast
signals.
If you select [Yes], the TV will automatically set this
feature to [On] or [Off] according to signal strength.
Do you wish to enable automatic control?
Yes mode :
This function performs automatic distinction
of On or Off�
7 Press to display the Auto Tuning startup
screen� Press to start the automatic
search�
Auto Tuning
Progress
Found
1%
8 When the automatic search is completed, the
TV will automatically return to 1 position�
Note:
The Quick Setup menu can also be display at
any time from the SETUP menu.
To Next Page
Loading...
