Toshiba 42XL700T - Using the TVs Features - Audio Output; Headphone Settings; Dynamic Range Control; Digital Audio Output Settings

26
Using the TV’s features
PCM: Select this when a 2ch digital stereo
amplifier is connected to the TV� When
you select a Dolby Digital or MPEG
audio track, the sound is converted to
the PCM (2ch) format and output.
Other features settings
Setting the On Timer menu
The feature allows you to set the TV to turn
on automatically to a preset position or input�
When On Timer is set to On, the green on timer
indicator on the front of the TV is lit (- page 9)�
1 From the APPLICATIONS menu, press s to
select On Timer, and then press �
2 Press s or r to select Enable On Timer,
and then press v or w to select On�
On Timer
Enable On Timer
Input
Volume
Time Until Power On
Position
30
00:10
TV
1
On
Done
3 Press s or r to go through the list adding
the details of the on timer by using the
Number buttons and v or w to make
selections, and then press �
Input: Select a video input source (TV, EXT
1, EXT 2, EXT 3, EXT 4, HDMI 1, HDMI 2,
HDMI 3, HDMI 4 or PC)�
Position: Set the position that will be tuned
when the TV turns on�
Note:
When an external input is selected in the
Input field, this feature is not available.
Volume: Select the volume level that will be
set when the TV turns on�
Time Until Power On: Set the amount of
time from now until the TV turns on using the
number buttons (maximum of 12 hours).
4 When all the details have been entered,
select Done and press to start the timer�
To cancel the On Timer
1 In the On Timer menu, select Enable On
Timer�
2 Press v or w to select Off, and then
press �
Headphone Settings
This setting is used to set the sound output when
headphones are connected�
Speaker
Link
Headphone Speakers
On Sound is output
(2 – + is
available�)
No sound
Off Sound is output
(Headphone
level menu is
available�)
Sound is output
(2 – + is
available�)
1 From the SOUND menu, press s or r to
select Headphone Settings, and then
press �
2 Press s or r to select Speaker Link and
then press v or w to select On or Off�
3 If you select Off, next select Headphone
Level, and then press v or w to adjust the
headphone sound�
50
Headphone Settings
Headphone Level
Speaker Link
Off
Dynamic Range Control
This feature allows control of audio compression
for digital TV programmes excluding those with
MPEG-1 and MPEG-2 audio�
1 From the SOUND menu, press s or r to
select Dynamic Range Control�
2 Press v or w to select On or Off�
Setting the Digital Audio Output
1 From the PREFERENCES menu, press s or
r until AV Connection is selected, and then
press �
2 Press s or r to select Digital Audio
Output�
AV Connection
PC/HDMI 3 Audio
HDMI Settings
HDMI 3 Audio
Woofer
Digital Audio Output
Digital
Internal
Auto
PC
Input Labeling
3 Press v or w to select Auto or PCM
Auto: This mode outputs Dolby Digital or
PCM to the digital audio output socket
providing it is being broadcast�