23
Using the TV’s features
2 Press v or w to select On, and then press
�
Resolution+
Level
Resolution+
On
3
3 Press s to select Level, then press v or w
to adjust the level�
Notes:
• This feature may not work properly depending
on the content.
• Adjustable range varies according to the
Picture Mode (- page 20) you set.
• Noise may appear on the image depending on
the device connected to the TV (e.g. a device
with a specific enhancer function).
Using Expert Mode
This feature allows you to turn the colours red,
green and blue on/off individually in order to
adjust each colour more accurately�
Note:
This feature is not available when Picture Mode
is set to AutoView.
1 From the Advanced Picture Settings menu,
press s or r until Expert Mode is selected,
and then press
�
2 Press s or r to select either Red, Green or
Blue, and then press v or w to select On�
Select Off for the other two colours�
0
0
Expert Mode
Green
Red
On
Blue
Colour
Tint
Off
On
3 Press s or r to select Colour or Tint, and
then press v or w to adjust�
Resetting the Advanced Picture Settings
This feature allows you to reset the current
Advanced Picture Settings to the default values�
1 From the Advanced Picture Settings menu,
press s or r until Reset is selected �
2 Press �
Activating Auto Brightness Sensor
When the Auto Brightness Sensor is activated,
it will automatically optimise the backlighting
levels to suit ambient light conditions�
1 From the Advanced Picture Settings menu,
press s to select Auto Brightness Sensor
Settings, and then press �
2 Press v or w to select On, and then press
�
Auto Brightness Sensor Settings
Backlight Adjustment Pro
Auto Brightness Sensor
On
3 Press s to select Backlight Adjustment
Pro, and then press �
4 The Backlight Adjustment Pro window will
appear�
Press again to display the adjustment
window�
5 Press v or w to select a point and press s
or r to adjust the level�
48
100
0
Backlight Adjustment Pro
Backlight Control Level
Control
Level
Ambient Light
Cancel
Reset
6 To cancel the adjustment when selecting a
point, select Cancel and press �
To return the settings of all points to the
factory defaults, select Reset, and then
press �
Adjusting the Static Gamma
The static gamma feature allows you to adjust
the levels of black in the picture�
1 From the Advanced Picture Settings menu
press s or r to select Static Gamma�
2 Press v or w adjust the level�
Adjusting Resolution+
The Resolution+ feature allows you to adjust the
clarity levels for your desired picture settings�
1 From the Advanced Picture Settings menu,
press s or r until Resolution+ is selected,
and then press �
To Next Page
Loading...
