Connecting your TV
Side connections
You can connect a wide variety of auxiliary
equipment via the terminals located on the right
side of the panel o (2)�
Please always refer to the owner’s manual of the
equipment to be connected for full details�
Connection example
• To select the side inputs, press o until the
video input mode list appears on the screen,
then press s or r to select o2 (- page 28),
then press �
• Before connecting any external equipment, turn
off all main power switches�
• If you connect mono sound equipment to
o (2), connect the audio output of the
equipment to the L/MONO jack on the TV�
• You can enjoy Video Games with this TV.
However shooting games, where the player
shoots at a target on the TV screen with a light
gun, may not work because of the LCD Colour
TV properties�
Back connections
Connection example
• Before connecting any external equipment, turn
off all main power switches�
• The unauthorized recording of television
programmes, DVDs, video tapes and other
materials may infringe upon the provisions of
copyright law�
• If you connect both of the S-VIDEO input
terminal and VIDEO input terminal, the
S-VIDEO signal will appear on the screen
(display changes to o 1S)�
• The COMPONENT VIDEO INPUT consists of
three component video signals (Y, PB/CB, PR/
CR) and provides the best picture performance�
These terminals can only be used with the
component video compatible equipment e�g�
DVD video player, etc�
• Additional equipment and cables shown are not
supplied with this TV�
Selecting the Woofer
Connect an external woofer to the Woofer output
terminal located on the rear of the TV�
1 From the AV Connection menu, press s or
r to select Woofer�
2 Press v or w to select Internal or External�
Internal : Select to use the Dynamic Bass
Boost�
External : Select to use an external woofer
system�
To Next Page
Loading...
