Toshiba 42XL700T - Connecting Your TV - Network Setup; Network Setup Configuration; IP Address Setup

41
Connecting your TV
To connect the TV to a home network
DIGITAL
AUDIO
LAN
Cable or
Phone jack
TV back view
Modem (if available) Router with Hub
Server PC
[1] [2]
[2]
[2][3]
[1] Coaxial or telephone cable (depending on
your modem type)
[2] Standard LAN cable
[3] Do NOT connect a phone jack directly to the
TV’s LAN port�
Using your home network
This TV is a DLNA CERTIFIED™ Player and
Renderer� This TV can play digital content stored
on a DLNA CERTIFIED™ product with server
function�
If you want to use this TV as a DLNA
CERTIFIED™ Player or Renderer, you will have
to configure the network on your TV�
If you want to use your home network, you will
have to configure the network on your TV�
Change the network settings if necessary�
Setting up the Network
Network Setup
Notes:
• When the DHCP function of the router
connected with this TV is On, you can set Auto
Setup to On or Off.
(This should usually be set to On.)
• When the DHCP function of the router is Off,
set Auto Setup to Off, and set the IP Address
manually.
IP Address Setup
Auto Setup:
1 From the PREFERENCES menu, select
Network Setup and press �
2 Press s or r to select IP Address Setup,
and press �
IP Address Setup Wired
MAC Address
Network Setup
3 Select Auto Setup, and then press v or w to
select On�
Auto SetupOn
Subnet Mask
IP Address Setup
IP Address
. . .
. . .
Note:
Other items will be greyed out when Auto Setup
is set to On.
Manual Setup:
1 From the PREFERENCES menu, select
Network Setup and press �
2 Press s or r to select IP Address Setup,
and press �
3 Select Auto Setup, and then press v or w to
select Off�
4 Press s or r to select IP Address�
5 Press v or w to select the field you want to
change, and then use the number buttons
to input the IP address� To save the setting,
press �