To select teletext mode:
Select a channel position with the desired
teletext service�
1 From the PREFERENCES menu, press s or
r to select Teletext�
2 Press v or w to select Auto or List mode�
Notes:
• It may take a few moments for the multi-page
teletext memory to load.
• You must exit teletext mode in order to display
the main menu.
Teletext general information
i button:
Pressing i once will bring up the teletext
screen� Press again to superimpose the teletext
over a normal broadcast picture� Press again to
return to normal TV mode. You need to return to
normal viewing if you wish to change channels�
When you first press i to access the text
service, the first page you see will be the initial
page�
In Auto mode, this displays the main subjects
available and their relevant page numbers�
In List mode, you will see the page numbers
currently stored on the each colour button�
Sub-pages:
Once in this chosen page, if there are sub-pages
they will automatically load into memory without
changing the one you are reading� If there are
many sub-pages, it will take a long time for them
all to load and this will depend on the speed with
which the broadcaster transmits them�
To access the sub-pages in memory, press v
or w to view them.
Using Subtitles
1 Press on the remote control to display
the current Subtitle status� While this status is
displayed, press again to change the setting�
Note:
If Subtitle is On, the TV will always display
subtitles whenever such information is available
for the channel you are viewing.
Using Auto mode
There are two Modes: Auto will display
FASTEXT, if available� List will display your four
favorite pages� In either mode, as an alternative
to the coloured buttons, you can access a page
by entering a 3-digit number, using the Number
buttons on the remote control, or to advance
to the next page, press PU, to go back to the
previous page press Pu� To change between
Auto and List, see above�
• Press i to access teletext�
If FASTEXT is available, you will see 4 coloured
titles at the base of the TV screen� To access any
given subject, simply press the relevant coloured
button on the remote control�
If FASTEXT is not available, you can access any
page simply by entering a 3-digit page number or
pressing the corresponding coloured button�
For further information on your particular text
system(s), see the broadcast teletext index page
or consult your local Toshiba dealer�
Using List mode
1 Press i to access teletext�
The four choices at the bottom of the screen
are now number – 100, 200, 300 and 400,
which have been programmed into the TV’s
memory�
2 To view these pages, use the coloured
prompt buttons�
e�g� press the Green button to view page 200�
3 If you want to change these stored pages,
press the coloured button for the colour you
want to change�
e�g� Press the Green button and enter the
3-digit number�
To Next Page
Loading...
