Note:
IP address field numbers must be between
0 and 255. After each field number has been
set, press to store the entire address. If
the entire IP Address is invalid, a warning
message will appear after is pressed.
6 Press s or r to select Subnet Mask, and
edit in the same way as IP Address�
Note:
If you manually set the IP address, you must not
use the same IP address for any other device.
The IP address you use should be a private
address.
MAC Address
You can view the xed MAC address for the TV
and for the Dual Band WLAN Adaptor, if one is
installed�
1 From the PREFERENCES menu, select
Network Setup and press �
2 Press s or r to select MAC Address, and
press �
Using the software keyboard
You can enter text by using the Software
Keyboard� The Software Keyboard window
will appear when you press on a field that
accepts character input�
To enter text using the software keyboard:
1 Select the desired character on the on-screen
software keyboard�
2 Press �
3 Repeat steps 1 and 2 until you have entered
all desired text�
4 Press the BLUE button to close the software
keyboard and return to the previous screen�
Note:
If
is pressed, changes are not saved
and the software keyboard window is closed.
The text will remain as it was before starting
the keyboard.
A BCDEFG
A a1@
AAA|
HIJKLMN
OPQRSTU
VWXYZ
Input operation on the remote control:
Button Description
Inputs the selected character�
0-9 Inputs the number directly�
s r v w Moves the character select�
CC cc
Moves the cursor�
Z
Moves the cursor to the head of a
character string�
z
Moves the cursor to the end of a character
string�
RED Deletes 1 character to the left of the cursor�
GREEN Cycles through upper case, lower case,
numbers, and symbols, if available�
YELLOW Chooses an accented version of the
current letter, if applicable�
BLUE Saves changes and closes the Software
Keyboard window�
Closes the Software Keyboard window
without saving changes�
Setting up the Media Renderer feature
Terminology:
DMS: DLNA CERTIFIED™ Server
DMR: DLNA CERTIFIED™ Renderer
DMC: DLNA CERTIFIED™ Controller
The TV can be configured as a DMR� When
operating as a DMR, the TV displays content
provided by a DMS� The selection of the media
is done by the DMC - the TV does not select the
input� The TV can play photo, movie, or audio
files when operating as a DMR�
Installation
You can congure the DMR settings individually,
or use Installation mode to be prompted for each
setting in order�
1 From the PREFERENCES menu, select
Media Renderer Setup and press �
PREFERENCES
REGZA-LINK Setup
Network Setup
Media Renderer Setup
Photo Frame Setup
Teletext
Panel Lock
Teletext Language
Off
Auto
4
Off
Display Settings
2 Press s or r to select Installation, and
press �
3 Press v or w to select On, and press �
To Next Page
Loading...
