24
Using the TV’s features
Note:
If you experience noise with a particular
programme on whose channel reception is
usually good, try setting MTS mode to Auto,
then switch b to e Mono (monaural).
Selecting the Dual 1 or Dual 2 mode
You can hear only Dual 1 or Dual 2 sound
selected, whenever bilingual programmes are
received�
1 Press
, and then press v or w to
display the SOUND menu�
2 Press s or r to select Dual, and then press
v or w to select Dual 1 or Dual 2�
Notes:
• When the MTS setting is in Mono mode, the
Dual menu is not available.
• The Dual menu setting status remains even if
the TV is turned off.
Selecting the stereo programmes
1 When a stereo programme is received, d
Stereo appears�
2 Press b to select the stereo/monaural
mode� d Stereo and e Mono appear
cyclically on the screen�
Selecting the bilingual programmes
1 When a bilingual programme is received,
j Dual appears�
2 Press b to select the sound to be
heard� The sound differs according to the
transmission system: NICAM or German
stereo/bilingual broadcast�
Viewing the Control Visualization
This feature displays the brightness histogram
and control curve of each scene�
1 From the PICTURE menu, press s or r until
Control Visualization is selected, and then
press �
The histogram window will appear�
Brightness
Number
Of
Pixels
Output
Control Visualization
Distribution
Input
Control Curve
to return to the previous menu�
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
Auto mode
The MTS Auto mode automatically recognize
stereo/bilingual programmes depending on the
broadcast signal�
1 Press
, and then press v or w to
display the SOUND menu�
0
SOUND
MTS
Dual Dual 1
Off
Balance
Advanced Sound Settings
Stable Sound
Auto
OffDynamic Range Control
Headphone Settings
2 Press s or r to select MTS, and then press
v or w to select Auto or Mono�
Mono mode
If you experience noise or poor reception of any
stereo/bilingual programme, set the MTS mode
to Mono�
Noise will be reduced and reception may improve�
To Next Page
Loading...
