A. Position selection
B. System (Sound) (- page 54)
C. Colour System (- page 54)
A : Automatic (factory set), P : PAL,
S : SECAM, N4 : NTSC 4.43 (MHz),
N3 : NTSC 3.58 (MHz)
If the colour of a certain channel is
abnormal, the automatic colour system
selection (A) may have malfunctioned, or
sound system selection is wrong� In such
a case, select another colour and/or sound
system (- page 54)�
D. Position Skip selection
Press s or r to turn the position skip
option on “8” or off “(”�
The position will then be skipped when you
select channels with PU or Pu�
The “8” mark will appear when you use
the Number button on the remote control�
E. Signal Class selection (- page 53)
Press s or r to select C or S�
C: 1 ch - 12 ch, 21 ch - 69 ch
S: 1 ch - 41 ch, 51 ch - 55 ch
F. Channel selection
Press s or r until your desired channel is
displayed (- page 53)�
G. Search operation
Press r to search up the band or s to
search down the band�
Press s or r repeatedly until your desired
signal is displayed�
NEVER PRESS ANY OTHER BUTTONS
WHILE THE SET IS TUNING�
H. Manual Fine Tuning
Press s or r until better picture and
sound are obtained�
I. Signal Booster
If the receiving signal is weak/strong and
the picture is noisy, the picture may be
improved when using this function�
Press the s or r to turn the Signal
Booster On or Off�
G. Label
Labels appear under the programme
position display each time you turn on the
TV, select a channel, or press
�
To change or create labels:
1) Press s or r repeatedly to select a
character for the first space, then press
v or w�
To Next Page
Loading...
