Toshiba B-EP2DL Series - Printer Specification

17
Printer Specification
B-EP2DL Series
Model B-EP2DL-GH20-QM-R B-EP2DL-GH30/32-QM-R
B-EP2DL-GH40-QM-R
Driving power source
Lithium ion battery 7.4V 2600mAh (Nominal value)
(Battery pack model name: B-EP802-BT-QM-R)
Printable count
Approx.100m/Full charge
(It depends on the operating environment, print conditions, battery condition, etc.)
Life cycle 300 cycles
Print method Direct thermal
Resolution 8 dots/mm (203 dpi)
Print speed
Max. 105.0 mm/sec.
(It depends on the operating environment, print conditions, battery condition, etc.)
Issue mode Peel-off/Batch
Effective print width Max. 48.0mm
Font
[Bitmap Font]
Times Roman, Helvetica, Presentation, Letter Gothic, Prestige Elite,
Courier, OCR-A, OCR-
B, GOTHIC725Black, Standard character, Bold character, Price
font 1, Price font 2, Chinese character, Writable character
[Outline font]
Helvetica (w/wo Proportional), Price font 1, Price font 2, Price font 3
Bar code
JAN8/EAN8, JAN13/EAN13, UPC-A/E, CODE39, CODE93, CODE128/EAN128, MSI,
NW-7, ITF, Customer bar code,
GS1 Databar (Omnidirectional/Truncated/Stacked/Stacked Omnidirectional/Limited/
Expanded/Expanded Stacked)
2-dimensional code QR code, Data Matrix, PDF417, Maxicode, MicroPDF417
Media detection sensor Transmissive/Reflective/Peel-off
Interface
IrDA (IrDA V1.2 Low Power)
  
USB (V2.0)   
Serial (RS-232C)  --- ---
Bluetooth ---
GH30 (V1.2)
GH32 (V2.1+EDR)
---
Wireless LAN
(IEEE802.11b/g)
--- --- 
Operating temperature
-15ºC to 50ºC
GH30 : -5 to 50degC
GH32 : -15 to 50degC
0ºC to 50ºC
(During battery charge: 0ºC to 40ºC/LCD display: 0ºC to 50ºC)
Operating humidity 10%RH to 90%RH (No condensation)
Storage temperature -25ºC to 60ºC
Storage humidity 10%RH to 90%RH (No condensation)
Dimensions (Unit: mm) 88.0 (W) x 119.0 (L) x 65.0 (D) (Excluding the projecting parts.)
Weight Approx. 480 g (Battery pack included, media and other accessories excluded.)
Accessories
Battery pack x 1
, Print head cleaner x 1, Belt clip x 1, Belt clip mounting screw x 2,
Ferrite Core x 1, Owner’s Manual x 1
BD Address Label x 2 (GH30 only)
Option
Single-slot battery charger (B-EP800-CHG-QM-R), 6-slot battery charger (B-EP800-
CHG6-QM -R), AC adapter (B-EP800-AC-QM-R), Cigarette lighter adapter (B-EP802-
DC12-QM-R), DC adapter (B-EP800-DC48-QM-R), Battery pack (B-EP802-BT-QM-R)
,
Linerless Label kit (B-EP902-LL-QM-R), Shoulder strap (B-EP900-SS-QM-R)
, Carry
case (B-EP902-CC-QM-R)
Supplement
Specification of this printer may be changed without prior notice.