(16 lines x 2 lines)
Upper line: Icons indicating the printer statuses, such as the radio
intensity, battery level, etc. are displayed.
Lower line: Printer status is indicated in alphanumerals or symbols.
LCD Message
ON LINE
The printer is ready for an issue command from
the host.
PAUSE
The printer is in pause state. When the printer
is paused during printing, the number of
unprinted labels is displayed.
COVER OPEN
The top cover is open.
LBL PRESENT ****
The printer is waiting for the printed label to be
removed from the media outlet. “****” indicates
the number of unprinted labels.
WAITING(XXXX)
The printer is waiting for a recovery of the
battery voltage or temperature decrease of the
print head or motor.
(2) Radio intensity Indicates the radio intensity in 4 levels（GH40 only）
(3) Connection Indicates an access point connection status（GH40 only）
(4) Sleep Displayed while the printer is in the power save mode.
(5) Transmission Indicates data transmission status.
(6) Error Displayed when an error occurred on the printer.
(7) External power source Displayed when the printer is charged with an optional device.
(8) Battery level Indicates the battery level in 5 levels.
(9) STATUS lamp
Lights or blinks in green, red, or orange to indicate the printer
status.
• Lights up in green: Normal state
• Lights up in orange: Near a low-battery state (Operable)
• Lights up in red: Low-battery state
• Blinks in green or orange: Communicating or internal processing
is in progress or a printed label is waiting to be removed.
• Blinks in red: Error state
(1)
(2) (3) (4) (6) (5) (7) (8)
(11)
To Next Page
Loading...
Need help?
General