Why is the printout from my Toshiba B-EP4DL-GH20-QM-R Printer light?
If the printout from your Toshiba Printer is light, it could be due to a dirty print head, so try cleaning it. Ensure the media is loaded properly. If you're using damaged media, load a new roll. Also, verify that you are using a Toshiba Tec approved media.
What causes 'COMMS ERROR' on Toshiba B-EP4DL-GH20-QM-R Printer?
If your Toshiba Printer has a COMMS ERROR, a parity or framing error may have occurred during RS-232C communication. Turn the power off and then back on, then resend the data from the host to the printer. If the problem continues, turn off the power and contact your Toshiba Tec service representative.
What does 'FLASH WRITE ERR.' mean on my Toshiba B-EP4DL-GH20-QM-R?
If your Toshiba Printer displays 'FLASH WRITE ERR.', a flash memory write error has occurred. Turn the power off and then back on. Send data from the host to the printer again. If the problem persists, turn off the power and contact your Toshiba Tec service representative.
What to do if my Toshiba Printer shows a command error?
If a Command error occurs on your Toshiba Printer, and up to 16 digits of alphanumeric or symbol are displayed on the upper line of the LCD, turn the power off and then back on. Send data from the host to the printer again. If the problem reoccurs, turn off the power and contact your Toshiba Tec service representative.
What does 'FORMAT ERROR' mean on Toshiba B-EP4DL-GH20-QM-R Printer?
If your Toshiba Printer displays 'FORMAT ERROR', a flash memory format error has occurred. To resolve this, turn the power off and then back on. Send data from the host to the printer again. If the problem reoccurs, turn off the power and contact your Toshiba Tec service representative.
What does 'FLASH MEM FULL' mean on Toshiba Printer?
If your Toshiba Printer displays 'FLASH MEM FULL', it means the flash memory has insufficient area for storing data. Turn the power off and then back on. Send data from the host to the printer again. If the problem reoccurs, turn off the power and contact your Toshiba Tec service representative.
General| Print Resolution | 203 dpi |
|---|---|
| Connectivity | USB, Serial, Ethernet |
| Print Speed | Up to 4 ips (101.6 mm/sec) |
| Max Print Width | 104 mm |
| Media Thickness | 0.06 to 0.15 mm |
| Memory | 8 MB |
| Supported Operating Systems | Windows, Linux |
| Power Supply | AC 100-240V |
| Media Width | 25.4 to 110 mm |
To Next Page
