- 29 -
5. Select the “Local Port”, and click the [New Port]
button.
6. Enter the network path of the shared printer (e.g.
\\*****\TECB-SA4), then click the [OK] button.
7. When the port setting is completed, click the [OK] button to close the “Properties” screen.
Note: After installing this printer driver, be sure to disable the Bi-directional support. For details, refer to Section
6.1 How to Enable Bi-directional Communication Support.
Since the setup information is stored in each PC that shares the printer, please configure the printer driver
settings after the completion of the port setting.
To Next Page
Loading...
