Toshiba B-EX6T1 - Registering a New Stock or Editing the Existing Stock

- 57 -
 Effects
 Mirror Image
When this checkbox is checked, the print will be a mirror image.
 Negative
When this checkbox is checked, the print will be white on black.
Depending on the printer models, the selectable options differ.
 Preset
Allows saving the settings of this printer driver so that they may be imported into a different or freshly installed
printer driver.
Section 3.1.2 Preset
3.1.1 Registering a new stock or editing the existing stock
By clicking either the [New] button or the [Edit] button, the following screen will appear.
To register a new stock, click the [New] button and enter the stock name and the size.
To edit the label stock already on the list, click the [Edit] button. The changes will be applied to the other printer
drivers’ stock information.
 Stock
 Name
Displays the stock name. When a new stock is registered, any stock name can be set. (2-byte characters
are acceptable.)
 Type
Select the paper type.
In case of using Standard label, set Die-cut label or Continuous (Fixed Length)as paper type.
In case of using Continuous paper media, set Die-cut label or Continuous (Fixed Length) or Continuous
(Variable Length) as paper type.
The paper feed length will vary based on the printable data length.