Toshiba B-EX6T1 - Installation for Windows 2000 (USB Plug & Play)

- 33 -
2.4 Installation under Windows 2000 (USB with Plug & Play
Enabled)
Note: Proper operation is not guaranteed on the PC running Windows 2000.
1. Turn on the PC.
Note: Log on as the user with administrative privilege.
2. Turn on the printer and connect it to the PC with a USB
cable.
3. “USB DEVICE” is detected and “USB Print support” is
automatically installed.
4. After a while, the “Found New Hardware Wizard” is
displayed. Click the [Next] button.
5. Select the “Search for a suitable driver for my
device (recommended)”, and click the [Next]
button.
6. Check the “Specify a location” checkbox, then
click the [Next] button.