- 32 -
9. Installation starts.
Supplement: If the dialog box on the right appears
after the installation, click the [Disable]
button.
10. Select whether or not to use the printer as a
default printer, then click the [Next] button.
11. When the installation is completed, the screen
on the right will appear. At this time, a new
printer icon is added to the “Printer” folder.
Click the [Finish] button.
If you want to perform a print test, click the [Print
a test page] button.
Note: Since the setup information is stored in
each PC that shares the printer, please
configure the printer driver settings after
the completion of the port setting.
To Next Page
Loading...
