Name: Toshiba B-SA4T
Brand: Toshiba
Rating: 4 (1 reviews)

To Next Page

To Previous Page

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33001A

3. Wireless LAN Module: B-SA704-WLAN-QM

3- 5

8. Connect the Wireless LAN Power Cable and the LAN Cable as shown below.

9. Fit the Antenna Cover to the back of the printer. Secure it with the SMW-3x6 screw.

10. Re-attach the Side Panel to the printer.

LAN Cable

Wireless LAN Power Cable

CN12

CN17

ntenna Cove

LAN Cable

Pass the LAN Cable through the

cut of the Antenna Cover.

SMW-3x6 Screw

Other manuals for Toshiba B-SA4T

Questions and Answers:

Need help?

Do you have a question about the Toshiba B-SA4T and is the answer not in the manual?

General

Print Method	Thermal transfer and direct thermal
Resolution	203 dpi
Print Width	104 mm
Interfaces	Serial, Parallel, USB
Optional Interfaces	Ethernet, Wireless
Barcodes	Code 39, Code 128
2D Codes	PDF417, Data Matrix, QR Code, MaxiCode
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-20 - 60 °C (-4 - 140 °F)
Humidity	20% to 85% (non-condensing)
Interface	USB, Serial (RS-232), Parallel, Ethernet, Wireless