Name: Toshiba B-SA4T
Brand: Toshiba
Rating: 4 (1 reviews)

To Next Page

To Previous Page

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33001A

(Revision Date: Feb. 25, 2008)

8. RFID Module: B-SA704-RFID-U2-EU-R

8- 5

3. Slightly push the Upper Sensor Lever inside (1), and open the Upper Sensor Ass’y (2).

4. Pushing the tabs on the rear of the Media Sensor Block toward the front of the printer, slightly lift the

back of the Media Sensor Block, and remove it toward the printer back.

5. Turn over the Media Sensor Block, and secure the Antenna Ass’y with the supplied three Tapping

Screws.

Upper Sensor Lever

Upper Sensor Ass’

(1)

(2)

Tab

Media Sensor Block

Tapping Screw M-3x8

Antenna Ass’

Sensor Block

Other manuals for Toshiba B-SA4T

Questions and Answers:

Need help?

Do you have a question about the Toshiba B-SA4T and is the answer not in the manual?

General

Print Method	Thermal transfer and direct thermal
Resolution	203 dpi
Print Width	104 mm
Interfaces	Serial, Parallel, USB
Optional Interfaces	Ethernet, Wireless
Barcodes	Code 39, Code 128
2D Codes	PDF417, Data Matrix, QR Code, MaxiCode
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-20 - 60 °C (-4 - 140 °F)
Humidity	20% to 85% (non-condensing)
Interface	USB, Serial (RS-232), Parallel, Ethernet, Wireless