Toshiba B-SA4T - Page 57

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33001A
(Revision Date: Feb. 25, 2008)
8. RFID Module: B-SA704-RFID-U2-EU-R
8- 17
3) Set an AGC threshold of data write.
Set a value which is lower than the AGC value obtained by a read test by 1 or 2, taking variation of
RFID tags in performance into consideration.
Read data is displayed.
3132333435363738
39304142 (0A)
Press the [FEED] and [RESTART] keys to return to the RFID
Setting Menu (”<10>RFID”).
<10>RFID
[FEED], [RESTART]
Data in parentheses ( ) is the AGC value expressed in hex. code.
Write down this value.
Continued from the previous page
<10>RFID
[PAUSE]
<10>RFID
Q VALUE 2
Choose “2” with the [FEED] or [RESTART] key.
When “2” is already chosen, go to the AGC threshold for data write
setting menu.
[RESTART]
[FEED]
15
•
•
2 (Default)
•
•
0
<10>RFID
WT AGC 11
[FEED] or [RESTAT]
<10>RFID
WT AGC 9
A
GC threshold for data write setting menu is displayed.
Choose a threshold value (decimal number) with the [FEED] o
r
[RESTART] key.
When the measured AGC is 10 (0A), for example, choose “9” (a
value lower than the measured AGC by 1 or 2).
[RESTART]
[FEED]
15
•
•
11 (Default)
•
•
0
[PAUSE]
<10>RFID
Q VALUE 2
[FEED] or [RESTART]
[PAUSE]
Example
Press the [PAUSE] key.
When ”<10>RFID” is displayed, press the [PAUSE] key until the Q
value setting menu is displayed.
Press the [PAUSE] key.
<10>RFID
WT MIN AGC 11
A
GC threshold lower limit for retry setting menu is displayed.
Choose a lower limit (decimal number) with the [FEED] or
[RESTART] key.
Usually, choose the same value with the AGC threshold for data
write (WT AGC).
[FEED] or [RESTAT]
<10>RFID
WT MIN AGC 9
[PAUSE]
[RESTART]
[FEED]
15
•
•
11 (Default)
•
•
0
Press the [PAUSE] key.
<10>RFID
RFID Setting Menu (”<10>RFID”) is displayed.
A
n AGC threshold settin
g
is com
p
leted.