Why won't my Toshiba B-SA4TP Printer turn on?
If your Toshiba printer won't turn on, the power cord may be disconnected, the AC outlet may not be functioning, or the fuse may have blown. Ensure the power cord is plugged in, test the outlet with another appliance, and check the fuse or breaker.
What causes 'SYSTEM ERROR' on a Toshiba Printer?
A 'SYSTEM ERROR' on your Toshiba printer can be caused by several factors. The printer might be in a noisy location, power cords of other appliances may be nearby, the power cord isn't grounded, the printer shares a power source, or the host computer's software has an error. To fix this, keep the printer and cables away from noise, ground the power cord, provide an exclusive power source, and confirm the host computer operates properly.
How to resolve EXCESS HEAD TEMP error on Toshiba Printer?
If your Toshiba printer displays an 'EXCESS HEAD TEMP' error, the print head has overheated. Turn off the printer and allow it to cool down for about 3 minutes.
What to do if my Toshiba B-SA4TP prints a blurred image?
If the printed image from your Toshiba printer is blurred, the ribbon and media may not be matched correctly, or the print head may be dirty. Select an appropriate ribbon for the media type and clean the print head using a Print Head Cleaner or a cotton swab slightly moistened with ethyl alcohol.
What does 'FLASH WRITE ERR.' mean on my Toshiba B-SA4TP and how to fix it?
A 'FLASH WRITE ERR.' on your Toshiba printer indicates an error occurred while writing to the flash ROM. Turn the printer off, and then on again.
What does 'FORMAT ERROR' mean on my Toshiba B-SA4TP Printer?
A 'FORMAT ERROR' on your Toshiba printer indicates an error occurred while formatting the flash ROM. Turn the printer off, and then on again.
How to fix 'FLASH CARD FULL' error on Toshiba B-SA4TP Printer?
A 'FLASH CARD FULL' error on your Toshiba printer means saving failed due to insufficient capacity in the flash ROM. Turn the printer off, and then on again.
What does 'EEPROM ERROR' mean on my Toshiba Printer and how to resolve it?
An 'EEPROM ERROR' on your Toshiba printer indicates that data cannot be properly read from or written to a backup EEPROM. Turn the printer off, and then on again.
How to fix RIBBON ERROR on Toshiba Printer?
A 'RIBBON ERROR' on your Toshiba printer can occur if the ribbon is not fed properly or has run out. To resolve this, remove the ribbon and check its status, replacing it if necessary. If the ribbon has run out, load a new one. Then press the [RESTART] key.
What does 'HEAD OPEN ****' mean on Toshiba Printer?
The 'HEAD OPEN' error on your Toshiba Printer means that the Top Cover is open. Close the Top Cover. Then press the [RESTART] key.
General| Print Method | Thermal Transfer / Direct Thermal |
|---|---|
| Max Print Width | 104 mm |
| Weight | 15 kg |
| Ribbon Core | 25.4 mm |
| Resolution | 203 dpi |
| Interfaces | USB 2.0, LAN |
| Optional Interfaces | Wireless LAN |
| Memory | 4 MB Flash |
| Barcodes | Code 39, Code 128, ITF |
| 2D Codes | Data Matrix, PDF417, QR Code, MaxiCode |
| Dimensions | 238 mm (W) x 402 mm (D) x 332 mm (H) |
| Media Type | Roll, fan-fold |
| Media Thickness | 0.06 – 0.19 mm |
| Media Roll Diameter | 200 mm |
| Ribbon Length | 450 m |
| Media Width | 25.4 – 112 mm |
Explains the meaning of symbols used for warnings, prohibitions, and mandatory actions.
Covers critical safety instructions like using correct voltage, avoiding wet hands, and electrical hazards.
Lists environmental considerations and general handling advice to ensure correct machine function.
Outlines initial steps for setting up the printer safely and securely.
Provides instructions on how to properly connect the printer to a power source.
Guides the user through the process of loading labels or tags into the printer.
Explains the procedure for installing a ribbon for thermal transfer printing.
Details how to establish a connection between the printer and a computer.
Describes the steps to power on the printer and verify its status.
Covers configuring printer parameters via the system mode for optimal performance.
Details how to adjust various printer parameters like character code, baud rate, and language.
Explains how to activate automatic calibration for media detection.
Guides on configuring LAN communication and SNMP settings.
Details how to set the printer's internal clock and battery check.
Covers setting up network parameters like IP address, gateway, and subnet mask.
Provides step-by-step instructions for installing printer drivers on Windows.
Explains how to perform a print test to verify setup and print quality.
Details how to fine-tune print start position, cut/strip position, and print tone.
Guides on setting sensor thresholds for accurate print positioning.
Details the procedure for resetting the printer to clear data and return to idle state.
Provides instructions for routine cleaning to maintain printer performance and print quality.
Explains how to clean critical internal components like the print head and sensors.
Lists common error messages, their causes, and solutions for troubleshooting.
Identifies potential issues like the printer not turning on or media not feeding, with causes and solutions.
Provides detailed steps for safely removing jammed media from the printer.
Describes the default interface options like Parallel, USB, and LAN.
Provides details on media types, sizes, and specifications for labels and tags.
Classifies media into label or tag types and lists dimensions.
Details cautions and guidelines for using RFID tags with the printer.
Specifies ribbon types, widths, lengths, and compatibility with media.
To Next Page
