To Next Page
S
Sarah ChenSep 2, 2025
What does 'COVER OPEN ****' mean on Toshiba Printer?
- TtedwardsSep 2, 2025
The 'COVER OPEN' error on your Toshiba Printer means that the Front Cover is open. Close the Front Cover, then press the [RESTART] key.
What does 'COVER OPEN ****' mean on Toshiba Printer?
The 'COVER OPEN' error on your Toshiba Printer means that the Front Cover is open. Close the Front Cover, then press the [RESTART] key.
What does 'SYNTAX ERROR' mean on Toshiba B-SA4TP?
A 'SYNTAX ERROR' on your Toshiba printer indicates that while in Download mode for upgrading firmware, it received an improper command. Turn the printer off, and then on again.
What does 'RFID ERROR' mean on Toshiba Printer?
An 'RFID ERROR' on your Toshiba printer indicates that it cannot communicate with the RFID module. Turn the printer off, and then on again.
What does 'RFID WRITE ERROR' mean on Toshiba B-SA4TP Printer?
An 'RFID WRITE ERROR' on your Toshiba printer means it failed to write data onto an RFID tag after multiple retries. Press the [RESTART] key.
What to do if media is not fed on Toshiba Printer?
If the media is not feeding in your Toshiba printer, ensure the media is loaded properly. Also, solve any error condition indicated in the message display.
What to do if the optional cutter module does not cut on Toshiba B-SA4TP Printer?
If the optional cutter module on your Toshiba printer is not cutting, ensure the Cutter Unit is closed properly, check for and remove any media jammed in the cutter, and clean the cutter blade.
What happens if I press the [FEED] key in the initial state and it results in an error on Toshiba B-SA4TP?
If pressing the [FEED] key in the initial state results in an error on your Toshiba printer, it means a feed or issue was attempted not on the following default conditions: Sensor type: Feed gap sensor Printing method: Thermal transfer Media pitch: 76.2 mm. Change the print condition by using the printer driver or a print command so that it corresponds to your printing conditions. Then, clear the error state by pressing the [RESTART] key.
What does 'CUTTER ERROR ****' mean on my Toshiba B-SA4TP?
If your Toshiba printer displays a 'CUTTER ERROR', the media is jammed in the cutter. Remove the jammed media. Then press the [RESTART] key.
What does 'HEAD ERROR' mean on Toshiba B-SA4TP Printer?
If your Toshiba printer displays a 'HEAD ERROR', there is a problem with the Print Head.
What causes a COMMS ERROR on my Toshiba Barcode Reader and how do I fix it?
A COMMS ERROR on your Toshiba Barcode Reader indicates a communication problem. This can be caused by a loose or incorrect connection. To fix it, make sure the interface cable is correctly connected to both the printer and the host, and ensure that the host is turned on.
General| Print Method | Thermal Transfer / Direct Thermal |
|---|---|
| Max Print Width | 104 mm |
| Weight | 15 kg |
| Ribbon Core | 25.4 mm |
| Resolution | 203 dpi |
| Interfaces | USB 2.0, LAN |
| Optional Interfaces | Wireless LAN |
| Memory | 4 MB Flash |
| Barcodes | Code 39, Code 128, ITF |
| 2D Codes | Data Matrix, PDF417, QR Code, MaxiCode |
| Dimensions | 238 mm (W) x 402 mm (D) x 332 mm (H) |
| Media Type | Roll, fan-fold |
| Media Thickness | 0.06 – 0.19 mm |
| Media Roll Diameter | 200 mm |
| Ribbon Length | 450 m |
| Media Width | 25.4 – 112 mm |
Explains the meaning of symbols used for warnings, prohibitions, and mandatory actions.
Covers critical safety instructions like using correct voltage, avoiding wet hands, and electrical hazards.
Lists environmental considerations and general handling advice to ensure correct machine function.
Outlines initial steps for setting up the printer safely and securely.
Provides instructions on how to properly connect the printer to a power source.
Guides the user through the process of loading labels or tags into the printer.
Explains the procedure for installing a ribbon for thermal transfer printing.
Details how to establish a connection between the printer and a computer.
Describes the steps to power on the printer and verify its status.
Covers configuring printer parameters via the system mode for optimal performance.
Details how to adjust various printer parameters like character code, baud rate, and language.
Explains how to activate automatic calibration for media detection.
Guides on configuring LAN communication and SNMP settings.
Details how to set the printer's internal clock and battery check.
Covers setting up network parameters like IP address, gateway, and subnet mask.
Provides step-by-step instructions for installing printer drivers on Windows.
Explains how to perform a print test to verify setup and print quality.
Details how to fine-tune print start position, cut/strip position, and print tone.
Guides on setting sensor thresholds for accurate print positioning.
Details the procedure for resetting the printer to clear data and return to idle state.
Provides instructions for routine cleaning to maintain printer performance and print quality.
Explains how to clean critical internal components like the print head and sensors.
Lists common error messages, their causes, and solutions for troubleshooting.
Identifies potential issues like the printer not turning on or media not feeding, with causes and solutions.
Provides detailed steps for safely removing jammed media from the printer.
Describes the default interface options like Parallel, USB, and LAN.
Provides details on media types, sizes, and specifications for labels and tags.
Classifies media into label or tag types and lists dimensions.
Details cautions and guidelines for using RFID tags with the printer.
Specifies ribbon types, widths, lengths, and compatibility with media.
