Toshiba B-SX6T Series - Default Chapter; Table of Contents

EO18-33017
TABLE OF CONTENTS
Page
1. UNPACKING--------------------------------------------------------------------------------------------------------1- 1
1.1 Procedure ----------------------------------------------------------------------------------------------------1- 1
1.2 Checks--------------------------------------------------------------------------------------------------------1- 2
2. MAIN UNIT REPLACEMENT-----------------------------------------------------------------------------------2- 1
2.1 Replacing the MAIN PC Board -------------------------------------------------------------------------2- 2
2.2 Replacing the PS Unit-------------------------------------------------------------------------------------2- 3
2.3 Replacing the Stepping Motor --------------------------------------------------------------------------2- 5
2.4 Replacing the Ribbon Motors ---------------------------------------------------------------------------2- 7
2.5 Replacing the Print Head
-------------------------------------------------------------------------------------2- 8
2.6 Replacing the Solenoid (Standard on the B-SX8T, Option for the B-SX6T) ----------------2- 9
2.7 Replacing the Platen
------------------------------------------------------------------------------------------2-11
2.8 Replacing the Roller Belt and Feed Roller---------------------------------------------------------- 2-12
2.9 Replacing the Media Sensor
-------------------------------------------------------------------------------2-14
2.10 Periodic Maintenance Procedure--------------------------------------------------------------------------2-15
3. MECHANISM DESCRIPTION----------------------------------------------------------------------------------3- 1
3.1 Cutter Driver
-------------------------------------------------------------------------------------------------------3- 1
3.1.1 Replacing the Cutter Arm and Clutch -----------------------------------------------------------------3- 2
4. TROUBLESHOOTING -------------------------------------------------------------------------------------------4- 1
CAUTION!
1. This manual may not be copied in whole or in part without prior written permission of TOSHIBA
TEC.
2. The contents of this manual may be changed without notification.
3. Please refer to your local Authorised Service representative with regard to any queries you
may have in this manual.
Copyright © 2006
by TOSHIBA TEC CORPORATION
A
ll Rights Reserved
570 Ohito, Izunokuni-shi, Shizuoka-ken, JAPAN