Toshiba B-SX6T Series - Page 8

3.MAIN UNIT REPLACEMENT EO18-33017
2.2 Replacing the PS Unit
2- 4
2. Disconnect the PS Cable from CN1 connector of the PS Unit.
3. Replace the PS Unit with a new one, and reassemble in the reverse order of removal. When
reassembling, place the PS Cable into Notch (A) and Notch (B). Then, pass the Reactor cable through
Notch (C).
PS Uni
t
PS Cable
CN1 connector
PS Cable
Notch (C)
Reactor Cable
Notch (B)
PS Cable
PS Cable
Notch (A)