13
Introduction
5.375 x 8.375 ver 2.3
The power or USB Hub light is visible only when the AC adaptor or at least
one USB device is connected respectively.
Powered USB 3.0
ports
(USB Sleep and
Charge ports)
Connection point for USB 3.0, 2.0, or 1.1 devices.
When the dynadock™ is powered ON, this port
charges select connected battery-powered USB
devices (such as MP3 players and mobile phones),
even when the dynadock™ is disconnected from
your computer or your computer is off. For more
information, please see “Charging USB devices
using Toshiba USB Sleep and Charge” on page 30.
Note 1: Some USB devices may not support this
feature.
Note 2: Certain USB devices, such as optical disk
drives and hard disk drives, have high power
requirements.
Note 3: If your USB device came with an AC
adaptor, be sure to connect the device to a power
outlet with the AC adaptor.
Headphone jack A standard 3.5 mm jack for stereo audio output to
headphones/headsets/speakers.
Microphone jack A standard 3.5 mm jack for mono audio input from
a microphone/headset.
Component Description
To Next Page
Loading...
Need help?
General
