6 SETTING ITEMS
98 Character Entry
Character Entry
The Character Entry screen is for entering characters when you are setting and entering items.
You can enter the following:
Alphabet characters, numbers and symbols.
Enter the characters using the digital keys and , , , or , after switching the type of the
character with the [ ] digital key.
Switching the input mode
The type of the character is displayed in the first line of the message display panel. Set the type
of character to enter by pressing the [ ] digital key.
The input mode switches as follows each time the [ ] key is pressed.
Alphabet characters <--> Numbers
Entering characters
Example: To enter “Chicago”
1
Press [ ] to set the alphabet input mode.
2
Press [2] a few times to enter “C”.
3
Press to move the cursor to the right.
If you want to enter a character assigned to another digital key, you can enter it
without moving the cursor to the right or pressing .
SINGLE 001
ENTER NAME(MAX20)
:Aa
_
:Aa
C
SINGLE 001
ENTER NAME(MAX20)
SINGLE 001
ENTER NAME(MAX20)
:Aa
C_
To Next Page
Loading...
