2 SENDING A FAX
32 Basic Procedures
Original scanning range
The following figures show the original scanning area. Any information in the shaded area is not
printed on the paper.
Setting the transmission conditions
You can set the fax transmission conditions.
The transmission conditions are only applied to the current transmission. They return to
the default settings after the transmission.
Each default setting of resolution, original mode, exposure and ECM is adjustable.
P.101 “User Functions Menu Items”
Making settings
An example is explained below for [ORIGINAL MODE].
1
Press or to highlight the item to set.
2
Press to display the items in the lower hierarchies.
3
Press or to select the value to set.
Repeat step 2 and 3 as many times as needed.
4
Press [OK] to confirm the set value.
2 mm
(0.08 inch)
2 mm
(0.08 inch)
2 mm
(0.08 inch)
2 mm
(0.08 inch)
Feed
direction
A4
1
100%
01/01 12:01 M:100%
:INPUT FAX NUMBER
AUTO EXPOSURE
TEXT/PHOTO
4
1
100%
TEXT
ORIGINAL MODE
TEXT/PHOTO
PHOTO
To Next Page
Loading...
