Toshiba e-studio 2809a - Registering Terminal ID

6 SETTING ITEMS
106 Registering the Terminal ID
Registering the Terminal ID
This section describes how to register the terminal ID of this equipment. If the terminal ID is
registered in advance, sender information can be printed on the leading edge of the transmitted
original, and receiver information on the trailing edge of the received fax.
1
From the USER FUNCTIONS menu, select [FAX]  [TERMINAL ID].
 P.96 “Operating the USER FUNCTIONS Menu”
Press to start registering.
2
Press to select [ID NAME], and then press .
3
Enter the name (up to 20 characters) using the digital keys, and then
press [OK].
 P.98 “Character Entry”
4
Press to select [FAX NUMBER] and then press .
5
Enter the telephone number (up to 20 characters) using the digital
keys, and then press [OK].
4
TERMINAL ID
FAX
INITIAL SETUP
RX PRINT
4
ID NAME
TERMINAL ID
FAX NUMBER
ID NAME
:Aa
MFP-A
4
ID NAME
TERMINAL ID
FAX NUMBER
FAX NUMBER
:12
0123456789_