2.SENDING A FAX
Basic Procedures 27
2 SENDING A FAX
2
Align the original against the left inner corner of the glass.
Different size originals can also be sent in one transmission.
The original size is the size that you have set initially. When sending an original of a
size larger than the set size, make sure that all contents are scanned and no
portions are left out.
When an original is placed in the direction shown in the figure on the left:
The original is transmitted so that the pre-entered sender information is printed in
position A in the figure.
When an original is placed in the direction shown in the figure on the right:
The original is transmitted so that the pre-entered sender information is printed in
position B in the figure if the size of the original is LT/A4, and in position A in the
figure if the size is other than LT/A4.
The pre-entered sender information shows what is registered in the Terminal ID.
P.106 “Registering the Terminal ID”
3
Lower the Original Cover or RADF slowly.
e-STUDIO2802AF
e-STUDIO2809A Series
To Next Page
Loading...
