5.SENDING A N/W-FAX
Faxing from Applications 81
5 SENDING A N/W-FAX
3
Set the following options and click [OK].
1) Paper Size
Select the size of paper to be used for fax transmission.
2) Orientation
Select the printing direction of the fax transmission.
3) Resolution
Select the resolution to be used for fax transmission.
4) Department Code
Enter a department code when the department management function is enabled in this
equipment.
5) SNMP Settings
Click to check or change the SNMP settings.
P.82 “SNMP settings”
6) Edit Address Book
Click to edit the Address Book.
7) About
Click to check the FAX driver version.
8) Restore
Click to restore the values of the FAX driver settings to the default.
Even though no department code or an incorrect one is entered, a print job is transmitted if
[Print] has been set for [Invalid Department Code Print Job] in TopAccess. If [Delete] has
been set, the print job is deleted.
1
2
3
7
6
8
4
5
To Next Page
Loading...
