4. Scan to E-mail
Scanning Guide — How to Perform Scan to E-mail 51
4. Press the [SETTINGS] button.
• The screen returns to the SCAN TO E-MAIL screen.
SUPPLEMENTS: • Before pressing the [SETTINGS] button, you can specify other E-mail addresses as
you require.
• You can confirm or remove the E-mail addresses that you specified in the DESTI-
NATION screen which can be displayed by pressing the [DESTINATION] button.
P.57 "Confirming or removing E-mail addresses from destination"
Searching with search strings from LDAP server
NOTE: To search contacts in the LDAP server, the directory service must be registered using
TopAccess by the network administrator.
1. Press the [SEARCH ADDRESS] button.
• The ADDRESS SEARCH screen is displayed.
To Next Page
Loading...
