2 Installing Client Software for Windows
76 Installing Client Software for Raw TCP/LPR Printing
5
Select “Create a new port” and select “Standard TCP/IP Port” in the
“Type of port” drop down menu. Then click [Next].
y The Add Standard TCP/IP Printer Port Wizard dialog box appears.
6
Click [Next].
y If you are using Windows Vista, the above screen is not displayed.
7
Enter the IP address of this equipment in the “Printer Name or IP
Address” field and click [Next].
y If your network uses a DNS or WINS server, enter the printer name of this equipment
provided from DNS or WINS in the “Printer Name or IP Address” field.
y In the “Port Name” field, the port name is automatically entered according to the IP
address or DNS name entered in the “Printer Name or IP Address” field.
y When using Windows Vista, enter the IP address of this equipment in the “host name
or ip Address“ field and click [Next].
y The very first “IP“ is not displayed on Windows Vista.
To Next Page
Loading...
