Installing Client Software for Raw TCP/LPR Printing 77
8
Select “Standard” and click [Next].
y If you are using Windows Vista, the above screen is not displayed. Skip to step 10.
When the LPD Print setting is enabled, you can also configure LPR printing. When you
want to configure LPR printing, follow the procedure below.
- If you are using Windows Vista, right-click on the printer driver in the Printers folder,
select [Properties] and set the port with [Configure Port..] in the [Port] tab page.
Select “Custom” and click [Settings...].
To Next Page
Loading...
