Toshiba e-STUDIO2010AC - Page 103

2.Copier-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-49
<Note>
• “Sharpening the copy image” and “Minimizing moiré” are mutually contradictory. When an
adjustment is performed to sharpen the copy image, moiré may occur.
 Caution after the adjustment
Nothing in particular.
 Remarks
Enter a value within the recommended value range mentioned in the procedures. Otherwise, it may
cause a loss in copier performance, including degradation in the image quality.
+3
+100
+75
|
+1
+50
+25
|
0
+25
0
|
-2
-25
-50
|
-4
-75
-100
|
+4
+100
+100
|
+2
+75
+50
|
-1
0
-25
|
-3
-50
-75
|
Since “+25” is assigned to the center, the image quality
remains the same even if the indicator is changed from
“+3” to “+4”.
Assigned
adjustment value
of sharpness
Default:
Setting value “153”:
Soft Sharp