3.Printer-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
3-96
3.12.2 To Adjust the Sharpness
(1) Select “Twin Color” from among the “Color” options on the printer driver.
For Windows
Open the property page of the printer driver. Select “Twin Color” from among the “Color” options in
the “Basic” tab. Click “Details”. Select the color to use for the area other than black, from among the
“Color” options.
(2) Change the “Use Sharpness Filter” option on the printer driver.
(3) Perform sharpness adjustment.
For details of the adjustment procedure, refer to "3.1.4 Sharpness Adjustment".
PCL
PS
XPS
To Next Page
Loading...
