Toshiba e-STUDIO2010AC - To Improve the Reproducibility of Red Seal Color

3.Printer-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
3-125
3.14 To Improve the Reproducibility of Red Seal Color
 Explanation
When an original containing a red seal is printed, users can select the Red Seal Color Mode as the
original mode. Use this mode if the reproducibility of red seal color printed under the default settings is
insufficient.
 Procedures
(1) Select [08 SETTING MODE]. Change the value for code [8005] to “1”.
(2) Select the “Red Seal Color Mode” check box on the printer driver.
For Windows
* This adjustment will only have an effect on Auto or Color mode printing.
Open the property page of the printer driver. Select “General” in the “Original Image Quality Type”
box in the “Image Quality” tab, and then click [Setting].
Mark the “Red Seal Color Mode” checkbox in the “Basic” tab.
Before After
PCL
PS
XPS