Toshiba e-STUDIO2010AC - To Adjust the Image Density in the Toner Saving Mode

3.Printer-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
3-81
3.8.2 To Adjust the Image Density in the Toner Saving Mode
 Explanation
The product offers a toner saving mode. It is intended to automatically decrease the image density and
reduce the amount of toner used. Adjust the upper limit of the image density in the toner saving mode, in
order to obtain the desired image density requested by a particular user.
 Procedures
The service technician must perform all adjustments.
Before adjustment After adjustment
The image density is too dark, even when
printing is performed in the toner saving
mode.
The image density in the toner saving
mode is adjustable, as desired.