Toshiba e-STUDIO2010AC - To Scan an Original, While Enhancing Black

5.Scanning-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
5-14
5.6 To Scan an Original, while Enhancing Black
 Explanation
When a full-color original is scanned, black is not dark enough, compared to the original. (In general, the
scanned-in image is likely to become less dark.) Finely adjust the black density of the scanned-in image,
in order to darken black and closely match it with the original hue.
• This adjustment will have an effect only on the image scanned in the Full color mode (including the
Auto Color mode).
Before adjustment After adjustment
Black is not dark enough, compared to the
original.
Black is enhanced and closely matched
with the original hue.
Scan
Scan