Toshiba e-STUDIO2010AC - To Obtain Image in Even Density Level

2.Copier-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-92
2.22 To Obtain Image in Even Density Level
 Explanation
When an original with a background is copied in the automatic density adjustment mode, unevenness
may occur on the copied background. Perform this function to avoid density unevenness.
 Procedures
• Both the service technicians and the users can perform step (1).
• Only the service technicians can perform step (2).
Original After adjustment
When the density is adjusted
automatically, the density on the entire
copy image becomes uneven.
When the density is adjusted manually, the
density of the entire copy image is even.
Before adjustment
Feeding
direction
Feeding
direction