Toshiba e-STUDIO2010AC - To Maintain a Steady Color Balance on Thick Paper or Special Paper

3.Printer-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
3-40
3.3.2 To Maintain a Steady Color Balance on Thick Paper or Special Paper
 Explanation
The color balance varies according to a change in the environment, replacement of the consumables
and so forth. The amount of the change varies significantly, according to the paper type. Periodically
adjust the color reproducibility (automatic calibration) corresponding to the paper type, in order to
constantly maintain a steady color balance on any type of paper.
Automatic calibration is the basic adjustment to accurately reproduce colors on the printouts. When you
would like to accurately reproduce the desired hue or when you have replaced the consumables and
changed the installation environment, perform automatic calibration to ensure the color reproducibility.
 Procedures
• Perform the adjustment in accordance with the procedures below.
• Only the service technician must perform procedure (1).
• Both the service technician and the user can perform procedure (2).
Before adjustment After adjustment
The color balance varies according to the
paper type.
The color balance is constantly maintained
on any type of paper.
Plain paper
Plain paper
Thick paper
Thick paper