5.Scanning-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
5-15
Procedures
The service technician must perform all adjustments.
(1) Select [05 ADJUSTMENT MODE]. Change the values for codes [8314 to 8316] and [8371] to adjust
the black density of a scanned-in image.
• Setting “0” provides the lightest black, while setting “4” the darkest.
Caution after the adjustment
The adjustment may possibly provide the extremely dark background. Therefore, carefully perform the
adjustment, while checking the scanned-in image.
Color mode Original mode [05] code Recommended value
Acceptable
value range
Default
Full color
Text/Photo 05-8314 Set a value larger than 1. 0 to 4 1
Text 05-8315
Set a value larger than 0. 0 to 4 0Photo 05-8316
User Custom 05-8371
To Next Page
Loading...
