3.Printer-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
3-14
For Mac
* This adjustment will have an effect only on full-color printing.
Open the print dialog box. Change the “Color Settings 2” - “Color Balance” option.
• Initially, change the value by 4 steps, while checking the printouts until the optimum value is
obtained.
After changing the option on the printer driver, print and check the print image quality.
If further image quality adjustments are still necessary, the service technician must perform the next
procedure.
Mac
To Next Page
Loading...
