Toshiba e-STUDIO2010AC - Page 176

3.Printer-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
3-16
• The subcode varies according to the area where the density is adjusted. Refer to the table below
and set the subcode for the area to be adjusted.
PDL/
Resolution
Halftone Object
Color to
adjust
[05] Code Subcode
Recommende
d value
Acceptable
value
range
Default
PCL
600 dpi
Smooth
Text,
Graphic &
Image
Y 05-8058 0/1/2
Set a value
larger than
128 to
increase the
density.
Set a value
smaller than
128 to
decrease the
density.
0 to 255 128
M 05-8059 0/1/2
C 05-8060 0/1/2
K 05-8061 0/1/2
Detail
Text,
Graphic &
Image
Y 05-8062 0/1/2
M 05-8063 0/1/2
C 05-8064 0/1/2
K 05-8065 0/1/2
XPS
600 dpi
Smooth
Text,
Graphic &
Image
Y 05-8042 0/1/2
M 05-8043 0/1/2
C 05-8044 0/1/2
K 05-8045 0/1/2
Detail
Text,
Graphic &
Image
Y 05-8046 0/1/2
M 05-8047 0/1/2
C 05-8048 0/1/2
K 05-8049 0/1/2
Subcode Area where the density is adjusted
0 Low density area
1 Middle density area
2 High density area