Toshiba e-STUDIO2010AC - Page 192

3.Printer-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
3-32
 e-STUDIO2515AC/3015AC/3515AC/4515AC/5015AC
• When the value is changed, the images to be copied or faxed will be affected.
 Caution after the adjustment
Nothing in particular
Color
mode
[05] Code Subcode Subcode description
Recommended
value
Acceptable
value range
Default
Full color /
Black
4837
0 Low density area (K)
Set a smaller
value to make
lines thinner. (The
value 50 or more
is recommended.)
0 to 255
60
1 High density area (K) 85
2 Low density area (Y) 60
3 High density area (Y) 85
4 Low density area (M) 60
5 High density area (M) 85
6 Low density area (C) 60
7 High density area (C) 85