3.Printer-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
3-46
For Mac
* This adjustment will have an effect only on full-color printing
Open the print dialog box. Select “Photograph” from among the “Color Settings 1” - “Image Type”
options.
Caution after the adjustment
Nothing in particular.
Remarks
• Setting a color space to sRGB is a prerequisite to maximize the effectiveness of this adjustment.
Therefore, if the monitor does not support sRGB or if color management cannot be performed, the
effectiveness of the adjustment may be significantly lost.
• In general, it is impossible to reproduce color saturation closely matching the true colors, as viewed on
the monitor, because the range of colors reproducible in toner colors is narrower than the one on the
monitor.
Mac
To Next Page
Loading...
